Click to enlarge
The 24V Plug-In Relay.1 bundle is a complete PCB and parts kit including a Panasonic TQ2-24V relay. The circuit is very simple
while also being elegant. It is based on a circuit that was used throughout my vintage console for some of the mute/solo functions
as well as other logic functions. Very smooth operation is achieved by the included de-bounce and anti-spike measures. In this
circuit, with no connection to "VC" or the control pin, the relay is activated which couples the "B" pins to the "O" pins. By
simply making a 0V or ground connection from your logic PSU to the "VC" control pin, the relay is deactivated which couples the
"A" pins to the "O" pins.
If installed by soldering, the board sits only .83"(21.1mm) above the mating PCB. The United Chemi-Con capacitors have been
chosen due to their very low projection from the PCB. If the PCB is stuffed with our parts kit, the footprint is no more than
.41"(10.4mm) from the bottom of the solder pins to the tallest component.
Simple control of DPDT relay for switching balanced audio
The PCB is .9"(22.9mm) wide by .83"(21.1mm) inch tall
Operates smoothly on 12V or 24V (Proper relay required)
Uses common .100"(2.54mm) 3M header, 9 pins
Can be soldered directly to a PCB or used with a 3M socket
***Please note: This kit shipes with a TQ2-24V relay. The assembled pics below are for informational purposes only.
Additional information and photos:
Cost of separate items: $7.90